Industrial Protective Coatings for Engineered Repairs - SKPS
Industrial Protective Coatings for Engineered Repairs
Devcon introduced Plastic Steel®, a tough,steel-filled epoxy putty, as an alternative to welding and brazing. The fast curing urethane compounds are easy to mix and can have the repaired belt back in service just 90 minutes after application. Ceramic filled epoxy technology enables permanent corrosion resistance to pumps, shafts, pipes, and tanks.
- Metal repair epoxies designed to extend the life of critical process equipment.
- Flexane® urethanes for rubber repair.
- Floor Savers™ repair systems for repairing, protecting and skid-proofing facility floors.
- Emergency repair products for repairing and returning equipment to service in minutes.
Metal Repair Epoxies
Metal-filled epoxy technology that allow for fast economical permanent repairs to power plant and mining equipment. They can be machined, tapped and drilled, and corrosion resistant to harsh chemicals. These products are available in pourable versions that can be used to provide accurate detail reproductions for short run prototype mold patterns, holding fixtures and forming dies.
- Devcon® Plastic Steel Putty (A)
The original metal filled and machinable Devcon epoxy putty.
Replaces welding for hundreds of routine applications.
- Devcon® Plastic Steel Liquid® (B)
It provides accurate detailing reproduction in the making of moulds, light gauge forming dies, etc.
- Devcon® Plastic Steel® 5 min® Putty (SF)
Fast curing, steel filled epoxy putty for permanent emergency repairs and use at low temperatures.
- Devcon® Stainless Steel Putty (ST)
Stainless steel filled epoxy putty for patching, repairing and rebuilding stainless steel and non-ferrous equipment.
- Devcon® Aluminum Putty (F)
Aluminum filled epoxy putty for cost-effective repairs to aluminum castings, components, and equipment.
- Devcon® Aluminum Liquid (F-2)
Aluminum filled pourable epoxy liquid for making moulds and reproducing the fine details of patterns and fixings.
- Devcon® Underwater Repair Putty(UW)
High performance technology for repairing, patching and rebuilding equipment in habitually wet enviornments, including under water.
- Devcon® Carbide Putty
Silicon carbide filled epoxy putty for economical protectio against wear and abrasion
- Devcon® Bronze Putty
Bronze filled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts
- Devcon® Wear Resistant Putty (WR-2)
Smooth, non rusting, all purpose epoxy putty for repairs requiring low frictionfinishes such as machine lathe beds
- Devcon® Fas Metal
High performance, alumina filled epoxy for making fast, depandable emergency repairs to leaks in pipes.
- Devcon® Zip patch
Easy to use adhesive patch kit for permanent waterproof repairs to pipes, tanks and drums.
- Devcon® Liquid Release Agent
Silicone release agent prevents Devcon’s epoxy and urethane compounds from sticking to patterns or mold surfaces
- Devcon® Cleaner Blend 300
Safe, multi purpose, non trichloroethane based degreaser for removing heavy greases and oil from metal surfaces.
Devcon DFense Blok Wearing Compounds
Specially formulated wear-resistant epoxy coatings that protect dry materials handling and storage equipment from abrasion, corrosion and wear.
- Devcon® DFense Blok™
A bead-filled epoxy compound formulated to significantly outlast traditional wear and abrasion products whileproviding superior protection.
- Devcon® DFense Blok™Fast Cure (FC)
A bead-filled epoxy compound that allows the equipment to be returned to service in 2 hours.
- Devcon® DFense Blok™Quick Patch
The only ceramic bead-filled wear and abrasion resistant epoxy for emergency repair.
- Devcon® DFense Blok™Surface Wetting Agent
A thixotropic epoxy gel system that improves the ease of application and cured adhesion properties of DFense Blok™.
These products are troelable, non-sag putties available in large particulate, high impact, and high temperature formulas. truly an advanced epoxy technology with quicker functional.
- Devcon® Wear Guard™ Fine Load
High-density, a micro-alumina ceramic bead-filled epoxy system for protecting equipment that handles particulate smaller than 1″ 8”.
- Devcon® Wear Guard™ High Load
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1″8”.
- Devcon® Wear Guard™ High Temp
High-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in high-temperature applications.
- Devcon® Wear Guard™ High Impact
High density, micro alumina ceramic bead-filled epoxy system with urethane acrylate for superior impact abrasion used for protecting
equipment against tremendous impact and flex.
- Devcon® Combo Wear FC
High-tech, epoxy compound for quickly repairing processing equipment and returning to service in as little as 1.5 hours.
- Devcon® Aluminium Wear Compound
Blended aluminum-filled epoxy, used to repair fatigued metal surfacewhere exceptional durability and ruggedness is required.
Ceramic filled epoxy technology used to make permanent repair to pumps, shafts, pipes and tanks where a corrosion resistant polymer is needed to protect all metals against corrosion and erosion in slurry applications. these products apply easily with a brush or towel.
- Devcon® Titanium Putty
High performance, non rusting titanium reinforced epoxy putty for making repairs that can be precision machined
- Devcon® Brushable Ceramic
When applied in a 15-20 mil coating, this low viscosity alumina filled. brushable epoxy compound produces a smooth, protective barrier against wear, abrasion, corrosion, erosion and chemical attack.
- Devcon® Ceramic Repair Putty
Trowelable alumina filled epoxy compound for rebuilding, smoothing and protecting processing equipment exposed tocorrosion, erosion, cavitation, chemicals and acids
Epoxy Tooling and Mould Production
Devcon advanced epoxy tooling and mould production resins provide a fast and economic solution for manufacturing tools patterns and moulds. They can all be machined, drilled and trapped plus their excellent flow properties allow accurate and detailed reproduction when casting over existing components
Belting and Rubber Repair
Flexible urethane technologies for repairing worn or damaged SBR conveyor belts, rubber-lined equipment such as pipes and tanks in mines, quarries and coal-fired power plants. These products are in a non sag putty for patching and repairing linings along with self-leveling thixotropic versions that create a smooth surface for repairing conveyor belts.
- Devcon® R-Flex®
The newest belt repair product in the market place. A self-leveling urethane kit for repairing holes and tears in conveyor belts. Also used to cover and protect clips/pins from scrapers.
- Devcon® Flexane® 80 Putty
Trowelable urethane for repairing and lining process equipment exposed to wear, abrasion, vibration or expansion/contraction.
- Devcon® Flexane® 80 Liquid
Medium-viscosity (10,000 cP) urethane fills voids completely and faithfully reproduces mold detail.
- Devcon® Flexane® 94 Liquid
Low-viscosity (6,000 cP) urethane fills voids completely and faithfully reproduces mold detail.
- Devcon® Flexane® Brushable
High-performance brushable urethane for protection against abrasion and impact.
- Devcon® Flexane® Primer
Required for maximum adhesion of Flexane® products. FL-10 Primer for all metals. FL-20 Primer for rubber, wood, fiberglass and concrete. FL-40 Primer for rubber.
Epoxy Flooring System
Easily applied by plant maintenance teams, Devcon epoxy flooring systems provide high strength, fast setting chemically resistant repairs and can help to solve slipproblems. Suitable for floors, walkways, ramps, platforms, loading docks etc.
Floor Repair/Patching Compounds
Floor Repair and Coating Floor Repair and Coating 100% solids epoxy-based polymers for patching, rebuilding and resurfacing concrete, brick, stucco and block.
- Devcon® Floor Patch™
All-purpose, easy-to-mix and apply concrete patching compound. With a compressive strength of 8,000 psi, Floor Patch™ provides three times the typical strength of concrete.
- Devcon® Floor Patch™ FC (Fast-Cure)
With this fast-curing version of Floor Patch™, repaired areas can be back in service in 3 hours.
- Devcon® Ultra Quartz™
Heavy-duty, trowelable premium floor patching system with excellent chemical resistance. System includes a primer for superior adhesion to cured concrete or other surfaces.
Epoxy floor coatings for protecting plant floors, platforms, walkways and ramps against acids, alkalis and solvents.
- Devcon® Epoxy Coat™ 7000 Non-VOC
100% solids self-leveling coating for smooth or mildly spalled concrete. Produces an attractive, durable, chemical-resistant finish. Silica aggregate can be added to rebuild floors by 1/16″ or more.
- Devcon® Epoxy Coat™ 7000 AR (Acid Resistant)
Novolac non-VOC epoxy coating provides superior resistance to concentrated acids (including 98% sulfuric) and chemicals. Excellent adhesion to concrete surfaces. Ideal for use around chemical storage tanks, dike walls and containment areas.