RPR Coating Removal by Induction

The induction disbonder works by the principle of induction. Heat is generated in the steel substrate and the bonding is broken.

Home/Products/RPR Coating Removal by Induction

Service Overview

The induction disbonder works by the principle of induction. Heat is generated in the steel substrate and the bonding is broken. The coating is then removed entirely without disintegrating and completely free from contaminating agents, i.e. blast media. This obviously makes disposal and recycling of waste easier and cheaper. Even inside the pittings and cracks on the surface, the coating is disbonded

Key Benefits

Solvent-free modified 2-pack epoxy coating, One coat system – No primers
Engineered Reliability

Solvent-free modified 2-pack epoxy coating, One coat system – No primers

Ability to cure under water Wide temperature range -35°C up to +150°C Unlimited overcoating
Advanced Analysis

Ability to cure under water Wide temperature range -35°C up to +150°C Unlimited overcoating

35+ years claim-free system : 25 years product warranty
Compliance Assurance

35+ years claim-free system : 25 years product warranty

Optimized solutions that reduce installation time and operational disruption
Minimized Downtime

Optimized solutions that reduce installation time and operational disruption

Our Engineering Approach
Comprehensive Assessment Process
Clean and fast system for coatings removal. No dust, no noise in the process. This is an envirnomentally friendly and safe system.
RPR Induction Disbonder used on coatings removal in storage tanks of the refinery of Petronor/Repsol in Bilbao. Instant Induction Heat break the bonding of the tank bottom lining. Motorized buggy provides high quality consistent rate of removal
EngineeringApproachImg

Our engineers conduct thorough evaluations of your assets to identify critical issues and determine the optimal composite solution. This includes

Industry Certifications
layers
ISO 9001:2015
layers
ASME PCC-2
layers
API 570
layers
ISO 24817 NACE Certified Engineers
Applications
Offshore Platforms
Offshore PlatformsHelideck Coating Removal by RPR: 10 Millimetre Epoxy AntiSkid Coating Removal by OFTEC GMBH. Fast sweep-blast was performed before re-coating
Storage Tanks
Storage TanksTank maintenance job, fast removal of the 600 microns Duatank coating, leaving a near to clean surface. RPR Induction Disbonder provides a safe working environment with no noise and no dust. Robotic solutions are available for a fast, efficient and controlled removal process
Pipeline
PipelineThe coating is then removed entirely without disintegrating and completely free from contaminating agents, i.e. blast media. This obviously makes disposal and recycling waste easier and cheaper. Even inside the pittings and cracks in the surface the coating is disbanded.
Bridges
BridgesRPR induction technology offers a safe, fast, and silent method for removing coatings from steel structures, including bridges, by using contolled, localized induction heating to break the bond between the coating and the substrate, resulting in easy removal in strips or pieces.
Buildings
BuildingsThe cleanest and fastest way to remove paint from steel surfaces. No dust, no noise! Effectively and without dust and noise removes the passive fire protection coating from the wall.
Deck
DeckUSS Nimitz Anti-Skid Deck Coating Removal Very hard antiskid deck coating on the deck of air craft carrier is easily removed with RPR equipment.
Request for This Service

Fill out the form below to discuss your specific requirements with our engineering team. We'll respond within 24 hours.

GET STARTEDGet Your Techno-Commercial Proposal Today.We deliver change.