Anti Corrosion Epoxy Coating
All Humidur® products are two-component solvent-free epoxy coatings, developed and solely produced by Acotec. The product was initially developed to stop underwater heavy marine corrosion. Since its first application in 1984, the product is claim-free until today.
- Heavy-duty performance and outstanding properties
- Cost-effective
- User friendly
- Environmentally friendly
KEY BENEFITS
- Solvent-free modified 2-pack epoxy coating, One coat system – No primers
- Environmentally friendly (no VOC’s, no coal tar, no heavy metals, no isocyanates)
- User friendly
- 35+ years claim-free system : 25 years product warranty
- Ability to cure under water
- High humidity < 95%
- Wide temperature range -35°C up to +150°C
- Unlimited overcoating
- Approved solution for CUI
- Non-flammable & non-explosive
- Adhesion values > 20 MPa
SOLVENT FREE – ONE LAYER SYSTEM
- No Solvent Entrapment
- No Contamination
- No Intermediate Curing Times
- 680 kg + losses for 1000m2 at 500um
- Can be submerged under water immediately after application
- Unlimited overcoating
- Flash Point > 100 °C
- Relative Humidity Max. 95%
- Claim Free for more than 30 Years
- Cost Savings on Manhours (Surface preparation, Application & Maintenance) & Low Operational Downtime
SOLVENT BORNE – 3 LAYER SYSTEM
- Risk of solvent entrapment at thicker coating
- Risk of contamination between each coat
- Curing time between each coat
- 880 kg + 3x losses for 1000m2 at 500um
- No
- Overcoating windows ranges from hours to days
- Flash Point ± 60°C
- Relative Humidity Max. 80%
- Maximum 5 – 10 Years
- Higher cost on Manhours for 3 Layer Coating Application, Frequent Maintenances) & Increased Operational Downtime
HUMIDUR® FP
Humidur® FP is the product in the Humidur® product range with the highest chemical resistance. This Norsok M-501 approved product is mostly used for marine applications, on offshore structures, for the corrosion treatment of storage tanks, reservoirs and pipelines in petrochemical environment, and many more. This product can be applied by brush, pump (single, plural, airless) and by a caulking variant.
HUMIDUR® ME
Humidur® ME is the 35-year proven product in marine environments. This product is developed upon request of the Belgian government to stop underwater heavy marine corrosion, even MIC, ALWC and biological forms of aggressive corrosion. It is suitable for an extended range of structures in salt, brackish, fresh, potable and drinking water. It can be applied by brush or spray.
HUMIDUR® WF22
Humidur® WF22 coatings specifically for the needs and challenges of the wind turbine industry. Based on Acotec’s proven and sustainable all-weather offshore coating technology, Humidur® WF22 delivers durable protection against aggressive humidity and seawater exposure. It shields the steel from UV radiation and light reflections from the weather and sea. Humidur® WF22 also protects the transition piece (TP) that is subject to splashes on the high tidal zone, where the structure endures mechanical impacts and waves.